<< Click to Display Table of Contents >> Navigation:  Chapter 3 Scheduling and Tasks > Tasks > Editing a Task > Borings and Wells Task

Boring and well tasks can contain one or more borings and wells. Notifications can be sent throughout the work process via email, SMS (text message), or internal notification within the program. To use this feature, the network version must be installed and the GaeaSynergy 4 Network Data Manager service running. These notifications can only be setup in tasks. The following notifications can be sent to selected personnel during the process:

 

•Boring or well required

•Boring or well completed

 

The "Boring or well required" notification will be sent to the selected WinLoG RT user when the task is created and the boring or well added as described below. The "Boring or well completed" notification will be sent when the boring or well is uploaded from WinLoG RT.

 

The status for the task will initially be "In Progress", then when a boring or well is required it will change to "Boring or Well Required". When all the required boring or well has been uploaded from WinLoG RT the status will change to "Boring or Well Completed".

 

If the task type is Borings and Wells two tabs will be displayed showing the defaults and borings and wells associated with the task as described in the sections below.