<< Click to Display Table of Contents >> Navigation:  Chapter 7 Stations and Sampling > Samples > Editing a Sample > Media Data Tabs > Concrete Data Tab

The Concrete Data tab is used to specify the information that pertains to concrete, grout, or mortar media. Some of this information will be be used when specifying geotechnical tests.

 

 

The following information can be specified on this tab:

 

Sample Type: This is used to select the type of sample; either concrete, grout or mortar.

 

Specimen Type: This is used to select the specimen type based on the whether the sample type is concrete, grout or mortar.

 

Batch Date: This is used to select the date the sample was batched.

 

Pour Date: This is used to select the pour date of the sample.

 

Curing Method: This is used to select the curing method from a list of curing methods.

 

Supplier: This is used to select the supplier from a list of suppliers.

 

Truck Number: This is used to specify the truck number.

 

Ticket Number: This is used to specify the ticket number.

 

Sample Location: This is used to specify the location where the sample was collected.

 

Sample Volume: This is used to specify the volume of the sample.

 

Sample Mass: This is used to specify the mass of the sample.

 

Temperature: This is used to specify the temperature at the time of sampling.