Rock Data Tab

<< Click to Display Table of Contents >>

Navigation:  Chapter 7 Stations and Sampling > Samples > Editing a Sample > Media Data Tabs >

Rock Data Tab

Previous pageReturn to chapter overviewNext page

The Rock Data tab is used to specify the information that pertains to rock media. These samples can later be linked to a boring log in the WinLoG module using the associated Boring specified on the Information tab.

 

clip40920

 

The following can be specified on this tab:

 

Depth: This is used to specify the depth and depth units of the sample.

 

Sample Size: This is used to specify the sample size or length and size units.

 

Sample Type: This is used to specify the sample type.

 

Weight: This is used to specify the weight and weight units.

 

Rock Type: This is used to select the rock type from the list of Rock Types.

 

Composition: This is used to select the composition from the list of Compositions.

 

Color: This is used to select the color from the list of Colors.

 

Origin: This is used to specify the origin of the rock.

 

Weathering: This is used to select the weathering from the list of Weathering.

 

Texture: This is used to select the texture from the list of Textures.

 

Inclusions: This is used to specify any inclusions in the rock.

 

 

Fractures Present:: This is used to specify if fractures are present in the rock.

 

Fracture Spacing: This is used to specify the fracture spacing and units.

 

Fracture Description This is used to describe the fractures.

 

 

Jointing Present:: This is used to specify if jointing is present in the rock.

 

Jointing Spacing: This is used to specify the jointing spacing and units.

 

Jointing Description This is used to describe the jointing.

 

 

Mineralogy: This is used to select the mineralogy in the sample. The Add button will display a list of Mineralogies that can be selected. The Remove button will remove the selected mineralogy form the list.

 

Secondary Elements: This is used to select the secondary elements in the sample. The Add button will display a list of Secondary Elements that can be selected. The Remove button will remove the selected secondary element from the list.

 

 

Sample Symbol: Click this button to select a sample symbol that will be used for the sample in the WinLoG module.