<< Click to Display Table of Contents >> Navigation:  Chapter 9 Geotechnical Data Management > Geotechnical Tests > Entering Test Data > Soil and Aggregates Tests > Consolidation > Data Entry > Consolidation Results Tab

This tab is used to specify the results of the test.

 

 

The following is display on this tab:

 

Initial Water Content: This is the calculated initial water content.

 

Final Water Content: This is the calculated final water content.

 

Initial Dry Density: This is the calculated initial dry density.

 

Final Dry Density: This is the calculated final dry density.

 

Initial Dry Unit Weight: This is the calculated initial dry unit weight.

 

Final Dry Unit Weight: This is the calculated final dry unit weight.

 

Initial Void Ratio: This is the calculated initial void ratio.

 

Final Void Ratio: This is the calculated final void ratio.

 

Initial Degree of Saturation: This is the calculated initial degree of saturation.

 

Final Degree of Saturation: This is the calculated final degree of saturation.

 

Compression Index: This is the calculated compression index.

 

Preconsolidation Pressure: This is the calculated preconsolidation pressure.

 

Swelling Index: This is the calculated swelling index.