<< Click to Display Table of Contents >> Navigation:  Chapter 4  Boring/Wells > Borings/Wells > Changing the  boring/well Template

 

Both the template and the version of the template can be changed for a log.

 

 

Changing the Template

 

A different template can be selected for the log using the Change Template menu button and the selecting Change Template from the menu or selecting Edit > Change Template. The Select Template form lists the current templates available.

 

(The appearance of the form will differ slightly depending on if it is WinLoG or WinLoG RT)

 

 

Select the desired template and then press the Ok button. Changing the template for the log will only change the format, and will not affect any of the log data.

 

 

Changing the Template Version

 

A different template version can be selected for the log using the Change Template menu button and the selecting Change Template Version from the menu. The Select Template Version form lists the current versions of the template. Select the version to use and click on the Ok button.